武汉理工大学材料科学与工程学院研究生导师：黄尚宇

• 2025完美·体育(中国)官方网站,WANMEI SPORTS英语全程班 早鸟3班
• 26完美·体育(中国)官方网站,WANMEI SPORTS全科上岸规划营「择校▪规划▪备考」
• 武汉理工大学2025完美·体育(中国)官方网站,WANMEI SPORTS专业课复习资料「完美·体育(中国)官方网站,WANMEI SPORTS▪笔记▪讲义▪题库」

　

一、姓名：黄尚宇

二、基本情况：

1、出生年月：1963年10月

2、学位：硕士

3、职称：教授

4、工作院系：材料成型加工系

三、教育经历(从大学开始)：

2005/08-2006/09，俄亥俄州立大学，材料加工工程，访问教授

1996/02-1996/07，哈尔滨工业大学，塑性加工，在职进修

1984/09-1987/03，南京航空学院，宇航制造工程，硕士

1980/09-1984/07，南京航空学院，宇航制造工程，学士

四、工作经历：

2010/03-至今，武汉理工大学，材料成型加工系，教授/博导/系主任

2002/06-2010/03，武汉理工大学，材料成型及控制工程系，教授/博导/系主任

2001/03-2002/06，武汉理工大学，塑性成形与计算机应用研究所，教授/所长

2000/11-2001/03，武汉理工大学，车身设计与制造教研室，教授

2000/05-2000/11，武汉理工大学，车身设计与制造教研室，副教授

1996/10-2000/05，武汉汽车工业大学，车身设计与制造教研室，副教授

1995/05-1996/10，武汉汽车工业大学，车身设计与制造教研室，教师

1988/04-1995/05，武汉工学院，模具教研室，教师

1987/03-1988/04，武汉工学院，锻压教研室，教师

五、研究领域(不多于3个)：

1、轻量化、难成形材料成形加工新技术

2、材料成形过程模拟、优化及精确控制

3、微电子封装材料制备加工新技术

六、科研项目(不多于5项)：

1、 微电子封装环保钎焊材料电磁压制制备技术的基础研究(国家自然科学基金：51475345)

2、 高应变率复杂应变路径下车身高强钢的塑性变形行为研究(国家自然科学基金：51205298)

3、 镁合金板材均匀压力线圈电磁温热复合成形基础研究(国家自然科学基金：50875192)

七、代表性论文及著作(不多于10项)：

[1]Fei Feng, Shangyu Huang*, Zhenghua Meng, Jianhua Hu. Experimental study on tensile property of AZ31B magnesium alloy at different high strain rates and temperatures. Materials and Design, 57:10-20, 2014

[2]Fei Feng, Shangyu Huang*, Zhenghua Meng, JianhuaHu. A constitutive and fracture model for AZ31B magnesium alloy in the tensile state. Materials Science & Engineering A, 594: 334-343, 2014

[3]Fei Feng, Shangyu Huang*, Jianhua Hu, Zhenghua Meng, Yu Lei. Analysis of the bulging process of AZ31B magnesium alloy sheet with a uniform pressure coil. The International Journal of Advanced Manufacturing Technology, 69: 1537-1545, 2013.

[4]冯飞,黄尚宇*,胡建华,雷雨,孟正华. 温度对AZ31B镁合金板材电磁成形的影响. 塑性工程学报 ,20(6):56-61, 2013

[5]雷雨,孟正华,胡建华,冯飞,黄尚宇.两种典型车用高强钢板高速率成形试验研究. 中国机械工程, 24(18):2529-2532, 2013.

[6]Zhenghua Meng, Shangyu Huang*, Jianhua Hu. Effects of process parameters on warm and electromagnetic hybrid forming of magnesium alloy sheets. Journal of Materials Processing Technology, 211(5): 863-867, 2011.

[7]孟正华,黄尚宇*,胡建华. 镁合金板材温热电磁复合成形试验研究. 机械工程学报, 47(10):38-42, 2011.

[8]余世浩、黄尚宇主编，模具CAD基础(国家“十一五”规划教材)，武汉：武汉理工大学出版社，2009

[9]余世浩、华林、黄尚宇主编，CAD/CAM基础，北京：国防工业出版社，2007

[10]中国模具工程大典(主编第4卷第3篇冲模结构设计)，北京：电子工业出版社，2007

八、联系方式：

1、Tel：18986281313

2、E-mail：huangshy@whut.edu.cn

3、工作地址(实验室)：材料大楼402室

1.Name: Shangyu Huang

2.Brief introduction:

1)Date of birth: 11/10/1963

2)Degree: Master

3)Title: Professor

4)Working department: Department of Materials Processing

3.Education experience(after entering university):

2005/08-2006/09, The Ohio State University, Material Processing Engineering, Visiting Professor

1996/02-1996/07, Harbin Institute of Technology, Plastic Working, In-service Education

1984/09-1987/03, Nanjing Aeronautical Institute, Aeronautics and Astronautics Manufacture Engineering, Master

1980/09-1984/07, Nanjing Aeronautical Institute, Aeronautics and Astronautics Manufacture Engineering，Bachelor

4.Working experience:

2010/03-Present, Wuhan University of Technology, Department of Material Processing, Professor/Director

2002/06-2010/03, Wuhan University of Technology, Department of Material Molding and Control Engineering，Professor/Director

2001/03-2002/06, Wuhan University of Technology, Institute of Plastic Forming and Computer Application，Professor /Director

2000/11-2001/03, Wuhan University of Technology, Division of Auto-body Design and Manufacture，Professor

5.Research field(no more than 3):

1)New processing technology for difficult-to-form or lightweight material

2)Simulation, optimization and precise control of material forming process

3)New fabrication and processing technology for microelectronic packaging materials

6.Research project(no more than 5):

1)The basic study on fabrication of environment friendly adhesion material in microelectronic packaging by electromagnetic compaction (Project of NSFC：51475345)

2)Research on the plastic deformation behaviors of high strength steel for auto-body in high strain rate and complex strain paths (Project of NSFC：51205298)

3)Basic research on eletromagnetic and warming hybrid forming of magnesium alloy sheet using uniform pressure coil (Project of NSFC：50875192)

7.Representative papers and works(no more than 10):

(1)Fei Feng, Shangyu Huang*, Zhenghua Meng, Jianhua Hu. Experimental study on tensile property of AZ31B magnesium alloy at different high strain rates and temperatures. Materials and Design, 57:10-20, 2014

(2)Fei Feng, Shangyu Huang*, Zhenghua Meng, JianhuaHu. A constitutive and fracture model for AZ31B magnesium alloy in the tensile state. Materials Science & Engineering A, 594: 334-343, 2014

(3)Fei Feng, Shangyu Huang*, Jianhua Hu, Zhenghua Meng, Yu Lei. Analysis of the bulging process of AZ31B magnesium alloy sheet with a uniform pressure coil. The International Journal of Advanced Manufacturing Technology, 69: 1537-1545, 2013.

(4)Feng Fei, Huang Shangyu*, Hu Jianhua, Lei Yu, Meng Zhenghua. Effects of temperature on electromagnetic forming of AZ31B magnesium alloy sheet. Journal of Plasticity Engineering,20(6):56-61, 2013.

(5)Lei Yu, Meng Zhenghua, Hu Jianhua, Feng Fei, Huang Shangyu. Experimental investigation on high rate forming of two kinds of typical High-strength steel in car manufacture. China Mechanical Engineering, 24(18):2529-2532, 2013.

(6)Zhenghua Meng, Shangyu Huang*, Jianhua Hu. Effects of process parameters on warm and electromagnetic hybrid forming of magnesium alloy sheets. Journal of Materials Processing Technology, 211(5): 863-867, 2011.

(7)Meng Zhenghua, Huang Shangyu*, Hu Jianhua. Experimental Research on Warm and Electromagnetic Hybrid Forming of Magnesium Alloy Sheet, Chinese Journal of Mechanical Engineering, 47(10):38-42, 2011.

(8)Yu Shihao, Huang Shangyu. Basic of Die&Mould CAD (“Eleventh Five-Year Plan” National Level Official Textbook), Wuhan: Wuhan University of Technology Press, 2009.

(9)Yu Shihao, Hua Lin, Huang Shangyu. Basic of CAD/CAM, Beijing:National Defence Industry Press, 2007.

(10)China Die&Mould Engineering Canon (Editor Article 3 in Volume 4 : Structure Design of Stamping Die & Mould), Beijing: Publishing House of Electronics Industry, 2007.

8.Contact information:

1) Tel: 18986281313

2) E-mail: huangshy@whut.edu.cn

3) Location of lab: Room 402 in The Material Building